Baxter PRISMAFLEX Disposable ST150

Description

The PRISMAFLEX Disposable Sets Membrane for CRRT

The PRISMAFLEX ST150 Set is a disposable, extracorporeal
circuit for use with the PRISMAFLEX System.
• The PRISMAFLEX  ST150 Set consists of a AN69 ST hollow fiber
hemofilter/dialyzer* and tubing lines.
• This filter is permanently connected to a blood access line (red-striped), a blood
return line (blue-striped), a dialysate inlet line (green-striped) and an effluent outlet
line (yellow-striped).
• The other lines of the set include :
– a replacement solution line (purple-striped)
– a pre blood pump line (white striped)
– an anticoagulant line (syringe)
• The configuration of the PRISMAFLEX set allows the following uses
depending on the configuration of the automated clamps on the machine :
– purple circuit : replacement in pre or post dilution (CVVH and CVVHDF),
– green circuit :
* dialysate in CVVHD and CVVHDF,
* replacement in post dilution in CVVH.
• The pre blood pump line allows the addition of infusion solution close to the end
of the patient access line and before the blood pump. This can be used as an
additional pre-dilution infusion to the replacement circuit.
• The PRISMAFLEX Set is provided with a specific small volume deaeration
chamber in which blood does not appear to mix with the replacement liquid the
majority of the time; this is a normal operation of the device.
• A 5-liter bag is provided to be connected to the end of the blood return line to
initially collect priming solution, during priming. Then, during treatment, this bag is
used to collect ultrafiltrate and/or used dialysate (connection at effluent line). Other
sterile 5 and 9 liter bags and sterile, non pyrogenic spikes can be ordered separately.
• All line connectors are compatible with the ISO 594/1 & 2 international standards
concerning conical fittings.
• The fluid pathways of the PRISMAFLEX Set are guaranteed sterile and non
pyrogenic.
• The PRISMAFLEX  ST150  Set is sterilized by ethylene oxide
(EtO). Deaeration is such that EtO residuals comply with the ones described
in ISO 10993-7.