Digiterm Comfort-4 Battery Dialysis Chairs

Digiterm Comfort-4 Battery Dialysis Chairs

Comfort-4 Battery as the name suggests contains a long lifetime power supply unit, providing independent operation of the chair in case of power network failures as well. One full charge is sufficient to operate the actuators multiple times in case of emergency or patient transfer.

Technical specification

Seat height adjustment 55-77 cm
Backrest adjusting range 80° (-13° under horizontal in Trendelenburg position)
Seat tilt adjustment 20°
Legrest adjustment 30°
Footrest adjustment 25 cm (motorised)
Size of upholstery L 210 x W 60 x H 9.5 cm
Armrest size L 57 x W 15 x H 6.5 cm
Size of castors 4x diameter 10 cm swivel castors with total lock
Weight of chair 80 kg
Maximum patient load 200 kg weight capacity
Technical data of motors 24V DC, IPX6
Standard power supply 100-240 V AC, 50/60 Hz
Rechargeable battery back-up 24 V/1,2 Ah
Applied directive and standards 2017/745 (MDR) and harmonized standards

Adjustments

● Electronic adjustments

Multiple independent adjustment possibilities offer maximum patient comfort, plus a reduction in work for staff.

5 motors as standard:

  • backrest
  • seat tilt
  • legrest
  • seat height
  • footrest

Handset

Especially designed for medical applications:

  • Longlife micro-switches are located under an exchangeable keypad foil
  • Liquid proof housing with IP 67 protection
  • Easy-to-use 13 buttons handset

Dedicated grey buttons for each movement.

  • Yellow coloured buttons to set Entry, Bed positions by multimovement
  • The head-down “Trendelenburg” posit ion can be reached easily from any previous one by using the red button
  • Individual buttons for optional movement (seat tilt adjustment and footrest adjustment)

Entry position

Supporting the entry

By using this    button on the handset the chair can be brought to the upright (Entry) position automatically from any previous one. Thereby allowing the patient easily to enter or leave the chair.

Bed position

Perfectly horizontal Bed position

Especially designed construction ensures achieving perfectly horizontal Bed position for maximum patient comfort while passing through several relaxation positions.

By using this    button on handset the chair can be brought automatically into the BED position.

Trendelenburg Position

Real TRB

The backrest adjusting range ensures REAL Trendelenburg position in compliance with EN 60601-2-52:

“the entire mattress support platform shall be able to achieve a minimum of 12° so that the patient’s head is lower than the circulatory centre point of the body.”

There are two ways of reaching Trendelenburg position by using the red buttons:

  • on handset by using  button
  • additional foot-switches on both sides of underframe (optional)

Tilt-up armrest

The solid upholstered armrest makes it possible to achieve the most suitable and restful arm position for any physique.
It can adjusted in height and entry is facilitated by simply tilting it up.
The multilayered soft armrest cushion is completely sealed against liquids and ensures improved patient comfort.
Optionally the distance between armrests can be adjusted also by swivelling completely.

Brake system/castors

Diameter 10 cm swivel castor with total lock.

Locks the wheel and swivel simultaneously for maximum stability when the equipment is stationary.

  • Wheel rotational motion in both directions (lockable)
  • Swivel motion in both directions (lockable)
  • Central operating brake with 4x diam. 10 cm twin wheel castors is optional

Standard colour combinationDuoShape upholstery

Exchangeable upholstery

Clean and modern design with dual colour for fresh look

It has been designed according to the latest developments in orthopaedics and ergonomics.

Can be removed easily with a few movements for cleaning or maintenance. Interchangeable with the previous upholstery types.

This new easy-to-clean upholstery covered by blood resistant artificial leather which is resistant to disinfectants, blood and urine too. The unified seat and legrest surfaces are more comfortable and easier to clean.

Instead of standard Chrom/Perle upholstery more than 50 alternative colours are available upon request.

Many other colour combinations available

Sample Upholstery Colours

* More than 50 colours are available upon request

Specialities

  • Perfect horizontal BED position
  • Real TRB position that meets TRB Compliance of EN 60 601-2-52 201.15.4.6.2 “the entire mattress support platform shall be able to achieve a minimum of 12° so that the patient’s head is lower than the circulatory centre point of the body.”

0.00

Description

Comfort-4 Battery as the name suggests contains a long lifetime power supply unit, providing independent operation of the chair in case of power network failures as well. One full charge is sufficient to operate the actuators multiple times in case of emergency or patient transfer.

Technical specification

Seat height adjustment 55-77 cm
Backrest adjusting range 80° (-13° under horizontal in Trendelenburg position)
Seat tilt adjustment 20°
Legrest adjustment 30°
Footrest adjustment 25 cm (motorised)
Size of upholstery L 210 x W 60 x H 9.5 cm
Armrest size L 57 x W 15 x H 6.5 cm
Size of castors 4x diameter 10 cm swivel castors with total lock
Weight of chair 80 kg
Maximum patient load 200 kg weight capacity
Technical data of motors 24V DC, IPX6
Standard power supply 100-240 V AC, 50/60 Hz
Rechargeable battery back-up 24 V/1,2 Ah
Applied directive and standards 2017/745 (MDR) and harmonized standards

Adjustments

● Electronic adjustments

Multiple independent adjustment possibilities offer maximum patient comfort, plus a reduction in work for staff.

5 motors as standard:

  • backrest
  • seat tilt
  • legrest
  • seat height
  • footrest

Handset

Especially designed for medical applications:

  • Longlife micro-switches are located under an exchangeable keypad foil
  • Liquid proof housing with IP 67 protection
  • Easy-to-use 13 buttons handset

Dedicated grey buttons for each movement.

  • Yellow coloured buttons to set Entry, Bed positions by multimovement
  • The head-down “Trendelenburg” posit ion can be reached easily from any previous one by using the red button
  • Individual buttons for optional movement (seat tilt adjustment and footrest adjustment)

Entry position

Supporting the entry

By using this    button on the handset the chair can be brought to the upright (Entry) position automatically from any previous one. Thereby allowing the patient easily to enter or leave the chair.

Bed position

Perfectly horizontal Bed position

Especially designed construction ensures achieving perfectly horizontal Bed position for maximum patient comfort while passing through several relaxation positions.

By using this    button on handset the chair can be brought automatically into the BED position.

Trendelenburg Position

Real TRB

The backrest adjusting range ensures REAL Trendelenburg position in compliance with EN 60601-2-52:

“the entire mattress support platform shall be able to achieve a minimum of 12° so that the patient’s head is lower than the circulatory centre point of the body.”

There are two ways of reaching Trendelenburg position by using the red buttons:

  • on handset by using  button
  • additional foot-switches on both sides of underframe (optional)

Tilt-up armrest

The solid upholstered armrest makes it possible to achieve the most suitable and restful arm position for any physique.
It can adjusted in height and entry is facilitated by simply tilting it up.
The multilayered soft armrest cushion is completely sealed against liquids and ensures improved patient comfort.
Optionally the distance between armrests can be adjusted also by swivelling completely.

Brake system/castors

Diameter 10 cm swivel castor with total lock.

Locks the wheel and swivel simultaneously for maximum stability when the equipment is stationary.

  • Wheel rotational motion in both directions (lockable)
  • Swivel motion in both directions (lockable)
  • Central operating brake with 4x diam. 10 cm twin wheel castors is optional

Standard colour combinationDuoShape upholstery

Exchangeable upholstery

Clean and modern design with dual colour for fresh look

It has been designed according to the latest developments in orthopaedics and ergonomics.

Can be removed easily with a few movements for cleaning or maintenance. Interchangeable with the previous upholstery types.

This new easy-to-clean upholstery covered by blood resistant artificial leather which is resistant to disinfectants, blood and urine too. The unified seat and legrest surfaces are more comfortable and easier to clean.

Instead of standard Chrom/Perle upholstery more than 50 alternative colours are available upon request.

Many other colour combinations available

Sample Upholstery Colours

* More than 50 colours are available upon request

Specialities

  • Perfect horizontal BED position
  • Real TRB position that meets TRB Compliance of EN 60 601-2-52 201.15.4.6.2 “the entire mattress support platform shall be able to achieve a minimum of 12° so that the patient’s head is lower than the circulatory centre point of the body.”

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.