Mindray WATO EX-65 Pro Anesthesia Machine

An enhanced anesthesia workstation

Maximum technical performance, contemporary and ergonomic design, incorporating the maximum patient safety in daily anesthesia practice, with small footprint and compact size is appropriate for any environment where space is limited.

The  WATO EX-65 Pro takes the recognized feature-rich anesthesia workstation to the next level.

Modern anesthesia ventilators offer a wide variety
of ventilation modes, enabling complex ventilation
care for the critically ill patient.
WATO EX-65 Pro’s ventilator has unique Volume
Guarantee modes to deliver desired total volume
to the patient in PCV and SIMV modes.

Key Features

• 15 inch touch display
• Flat Menu design: maximum 2-steps for vent mode settings
• Smart ventilator with all needed ventilation modes (VCV, PCV, PCV-VG, SIMV, PS and CPAP)
• PnP gas module
• Loops and waveforms on one page
• The new (optional) integrated air compressor
  is designed to drive the ventilator.
• EtCO2 and Capnogram with 3 options:lSidestream/Microstream/Mainstream
• 5 Agents with auto-identified
• BIS (Bispectral Index) – single wide module or combining with the gas module
• Integrated, Flexible and  Autoclavable breathing circuit with heating system
• More Precise…
  With new integrated innovative functions, the new A7 enables you to precisely
  control the system as well as different types of patient easily.
  A digital gas mixer with low flow Optimizer makes gas delivery precise and safe low flow possible.

More Visible…
With a 15.1 inch high resolution display,
intuitive touch user interface. The WATO
EX-65 Pro makes anesthesia process
more visible.
Visualizing the System Self-test procedure and
smart alarm management with graphs and
charts to simplify complicated operation steps.

More Cost Effective…
As a multifunctional anesthesia
workstation, WATO EX-65 Pro is designed
with cost in mind.
Lower flow becomes possible with Optimizer,
which helps reducing the usage of anesthetic
agent. The much longer life span flow sensors
makes the maintenance much easier.

Precise digital gas mixer with safe low flow by Optimizer

The digital gas mixer makes fresh gas flow setting easier and
more precise.
The fresh gas glow Optimizer indicates the recommended fresh
gas flow setting against your current setting value and the
minimum O2
needed of the patient. It enables a safe low flow
and minimize the waste of anesthetic agents and medical gases.

Precise Monitoring
With improved single slot CO2
module or double slot anesthetic
agent capability the Mindray Plug-and-Play Multi-Gas modules
provide comprehensive breath-by-breath analysis of FiO2
, EtO2, CO2, N2O, auto-detection of five anesthetic agents, as well as BIS.
AA Measurement: The new anesthetic agent calculation
software enables you to monitor the real time agent
consumption and keeps cost in mind.
Sample Gas return: The monitoring sample gas returns to
breathing circuit, it saves the cost for medical gas and
anesthetic agent as well as reducing the waste gas.

Optimizer saves your anesthetic agent
The low flow Optimizer provides real time guidance for cost effective optimization of
fresh gas flow, and thus anesthetic agent, during general inhalation anesthesia, the
Optimizer continuous informs users whether the fresh gas flow is too high, appropriate or
too low.
The availability of Optimizer results in large reduction in anesthetic consumption, it helps
cost savings and reduced environmental pollution.

Enjoy maximum performance at all stages of anesthesia
A full range of ICU grade ventilation modes meet your demands through all the stages of
anesthesia.

PCV
PCV-VG
SIMV-VC
SIMV-PC
SIMV-VG (new)
PSV + Apnea (with I:E setting) (new)
CPAP/PS (new)

Modern anesthesia ventilators offer a wide variety of ventilation modes, enabling complex
ventilation care for the critically ill patient.
The WATO EX-65 Pro’s ventilator has unique Volume Guarantee modes to deliver desired total
volume to the patient in PCV and SIMV modes. PCV-VG delivers the desired tidal volume to the
patient, offers the benefits of PCV with lowest inspiratory pressure for all breaths, better
oxygenation, along with the security of consistent tidal volume.
SIMV-VG delivers a set rate of pressure controlled breaths with a guaranteed volume to the
patient. The patient can breathe spontaneously between mandatory breaths. Pressure support
can be used to support the spontaneous breaths

15.1 inch Touch Screen with Intuitive UI

Configured with a high resolution, intuitive, 15.1
inch full color touch-screen users are able to view
and configure parameters as required. The
intuitive layout and simple flat-menu structure
ensure all parameters are clearly displayed and
only two steps required for ventilation mode
setting.

Visual Self-test

Visualizing the System Self-test procedure with
graphs and charts to simplify complicated
operation steps.
Automatic self-test
Manual leak test with graphic instruction step
by step
Recommended solution for failed step by
words and by picture

Smart Alarm

The Smart Alarm providing the real-time graphic
information enables urgently correction of the
fatal error more quickly

Touchable alarm
More alarm information: access to alarm log
Alarm limit setting directly from the alarm
message
Picture indication for potential issues

Modular Design
The Plug-and-Play monitoring modules are compatible with Mindray modular patient
monitor. The modular design not only saves your cost, but also makes your devices
maintenance easier.

Flow Sensors Which Customers Could Calibrate
The flow sensors are always a trouble maker for anesthesia machine user. For every couple
of months, the flow sensors shall be changed. Besides that, the flow sensor could easily
lose its accuracy, and results the inaccuracy of Tidal Volume, but it could only by be
calibrated by service technician.
As well as the two flow sensors in the expiration and inspiration ports for dynamic Tidal
Volume compensation, WATO EX-65 Pro comes with a built in 3rd flow sensor as a
benchmark. The benchmark flow sensor is used to calibrate the flow sensors in the exp &
ins ports to make sure the accuracy and expand the life span of the flow sensors
tremendously. And the calibration could be operated by customers!

3rd benchmark flow sensor
Customer calibration
Extended life span